SHEET S-101EXTERIOR · ROOFING

Roofing contractor on Staten Island

Full roof replacements for Staten Island homes, two-families and small commercial buildings, including asphalt shingle, flat roof membrane, flashing and gutters.

Roofing & Roof Replacement

Scope of work

A roof is mostly the parts you can't see: the deck, the underlayment, the flashing where the roof meets a wall or a chimney, and the ventilation that keeps the attic from cooking the shingles. We replace all of it, not just the top layer, and we show you what we find once the old roof is off.

Most Staten Island houses have one of two roofs: a pitched shingle roof on a detached or semi-attached home, or a low-slope (“flat”) roof on attached rowhouses, extensions, garages and storefronts. Plenty of homes have both. We install both, so you get one crew and one quote for the whole house.

Technical drawing: Roof assembly612RIDGE VENTARCH. SHINGLESICE & WATER SHIELD @ EAVEDRIP EDGE + GUTTER1AROOF ASSEMBLYSCALE: NTS · AXE CONTRACTING GROUP

What's included

  • Full tear-off down to the deck, with replacement of rotted or delaminated plywood
  • Ice-and-water shield at eaves, valleys and penetrations; synthetic underlayment on the field
  • Architectural asphalt shingles with matching ridge and starter courses
  • Low-slope roofing (modified bitumen or single-ply membrane, depending on the roof)
  • Step and counter flashing at walls and chimneys; new pipe boots
  • Ridge and soffit ventilation sized to the attic
  • Gutters, leaders and drip edge
  • Magnet sweep and haul-away. The yard is left the way we found it.

Local conditions

Roofing on Staten Island specifically

Wind off the water. East and South Shore homes take the wind straight off Lower New York Bay and Raritan Bay. We use the shingle manufacturer's high-wind nailing pattern and seal the starter course, because that's where wind gets under a roof first.

Flat roofs are the leak capital of the borough. Attached homes and extensions often have low-slope roofs that hold water at the parapet or the scupper. We set the slope and the drainage before choosing a membrane. NYC code generally requires a reflective “cool roof” surface when a low-slope roof is replaced, and we'll spec one that complies.

Permits. Whether a re-roof needs an NYC Department of Buildings filing depends on the building and the scope. Structural changes (new framing, adding dormers, changing the roof line) always do. We'll confirm what your job needs before you sign.

From our Google reviews

Sign-offs on this work

ITEMRoofing

This company doing my roof and they did amazing job. Very serious people , clean job and i am very happy .

SIGNED OFF BY Donny Skuka · Google review
Roofing
ITEMTrade partner · Licensed electrical contractor

As a licensed electrical contractor, we've had the pleasure of working alongside AXE Contracting on several projects. Their team is reliable, detail-oriented, and consistently delivers high-quality roofing and remodeling work. When AXE is on the job, we know the project will run smoothly and meet the highest standards. Highly recommended.

SIGNED OFF BY Murra Electric · Google review
Roofing
ITEMRoofing & construction

Axe Roofing and Construction did a great job, professional, reliable, and efficient. The quality of work was excellent, and everything was done on time. Highly recommend!

SIGNED OFF BY Eco Build · Google review
Roofing

How the job runs

Construction schedule

  1. 01Call & walkthrough

    We visit, measure, and listen. Usually within a few days of your call.

  2. 02Written quote

    Itemized scope and price, typically a day or two after the visit.

  3. 03Paperwork & scheduling

    Permits where required, condo/co-op COIs, materials ordered, dates locked.

  4. 04Build

    One crew lead, licensed trades where required, clean site every day.

  5. 05Walkthrough & sign-off

    We walk the finished job with you and close out the punch list.

Durations are illustrative. Your quote includes a schedule for your job.

FAQ

Roofing questions

How long does a roof replacement take on Staten Island?

Most single-family and two-family shingle roofs are torn off and replaced in one to three working days, depending on size, layers and weather. Flat roofs on attached homes are often a one- or two-day job. We schedule around the forecast and never leave a roof open overnight without protection.

Can you roof over my existing shingles?

Sometimes code allows a second layer, but we usually recommend a full tear-off. It's the only way to inspect and fix the deck, and it gives the new shingles a flat surface to seal on. If your roof already has two layers, it has to come off.

Do you do both flat roofs and shingle roofs?

Yes. Many Staten Island homes have a pitched main roof and a flat roof over an extension, porch or garage. We quote and install both.

Do I need to be home during the job?

No, as long as we have access to the driveway and an exterior outlet. We'll walk the finished roof with you, or send photos if you can't be there.

Often done together

Related sheets

Where we do roofing

Next sheet: yours

Tell us what you're building.

Walkthrough, written quote, clear schedule. Staten Island, Brooklyn and Manhattan.

Call Free estimate